Work Time Calculator
Calculate your total hours worked, daily earnings, and weekly pay based on your clock-in and clock-out times, unpaid breaks, and hourly rate.
Work Time & Earnings Estimator
Calculate your timesheet hours and gross pay
Enter the time you started your shift.
Enter the time you finished. If crossing midnight, the calculator will adjust automatically.
Total minutes of unpaid lunch or rest breaks taken during the shift.
Your gross hourly pay rate before tax and deductions.
Used to estimate your total weekly earnings.
Work Time & Earnings
Timesheet & Gross Pay Estimate
Enter your shift times and click Calculate Hours & Pay to see your total hours worked and estimated earnings.
For more detail on this, see the FTE calculator.
It only takes a few seconds to work percentage calculator.
Everything to Know About the Work Time Calculator Practical Guide
What this calculator does
Getting work time right matters more than most people expect, especially in tax and salary work where one wrong assumption can ripple through later steps. Our Work Time Calculator keeps the process simple and the result easy to read.
Who it helps
This tool is useful for self-employed workers, HR and payroll staff and job seekers comparing offers. Each group approaches work time with different priorities, yet the same careful inputs lead to a result everyone can rely on. Common situations include converting salary to hourly rates, planning for a pay rise and working out take-home pay. In each case, a quick check of work time helps you move forward with more confidence.
Getting accurate results
A few habits make work time far more reliable. First, compare gross and net side by side. Second, check official government guidance. Finally, run your numbers twice with slightly different assumptions so you can see a range of possible outcomes rather than relying on a single figure.
Mistakes to avoid
Two traps are worth knowing about: forgetting pension and benefit deductions, and ignoring different tax years. If your result ever looks surprising, review these first before assuming the calculator is at fault.
Reading your result
Treat the output as one piece of evidence rather than a final verdict. Think about how work and time might change if your situation shifted, and repeat the calculation with updated values when it does. Because the calculation runs instantly in your browser, you can test as many scenarios as you like without any limit. The layout is designed for readability, so you can use the Work Time Calculator comfortably on a small screen while on the move. If you are unsure about a value, try a low and a high estimate and see how far apart the answers are.
A note on accuracy
Treat the result as an estimate rather than an official calculation. Your actual tax and take-home pay depend on personal circumstances that only an official source or accountant can confirm.
Common Shift Lengths & Earnings
Typical gross and net hours for common UK shift patterns, assuming a standard 30-minute unpaid break (or 60 minutes for 12-hour shifts). Earnings estimated at £12.50 per hour.
| Shift Length | Gross Hours | Net Hours (Decimal) | Daily Earnings (£12.50/hr) |
|---|---|---|---|
| 6 Hours | 6.00 | 5.50 | £68.75 |
| 8 Hours (Standard) | 8.00 | 7.50 | £93.75 |
| 10 Hours | 10.00 | 9.50 | £118.75 |
| 12 Hours (Long Shift) | 12.00 | 11.00 | £137.50 |
Worked Example: A Full Week on the Time Card
Take a standard week: Monday to Friday, 09:00 to 17:30, with a 30-minute unpaid break each day. Each day is 8 hours 30 minutes minus 30 minutes = 8 hours. Five days × 8 hours = 40 hours for the week. At £12.50 an hour, that is 40 × £12.50 = £500 gross for the week. Now add a Saturday shift of 2 overtime hours. If the contract pays time-and-a-half for overtime, those 2 hours pay 2 × £18.75 = £37.50, taking the week to £537.50. Note that time-and-a-half is a common contract term, not a legal requirement — UK law sets no overtime premium, so the rate depends on the employment contract.
Regular Hours vs Overtime
Regular hours are the hours in the contract — usually 35 to 40 a week for full-time work. Overtime is anything beyond that. Some contracts pay a higher rate for overtime (often time-and-a-half, sometimes double time on Sundays or bank holidays), some pay the normal rate, and some offer time off in lieu instead of extra pay. The calculator’s time card separates regular and overtime hours so each can be paid at its own rate. Always check the contract first: the same 45-hour week can be worth very different amounts depending on what it says about overtime.
Time Rounding: 5, 10, 15 or 30 Minutes
Many employers round clock-in and clock-out times to a set interval. A 5-minute rounding is the most precise; 15-minute rounding is the most common. Example: clocking in at 09:07 rounds to 09:00 under 15-minute rounding if the policy rounds down, or to 09:15 if it rounds to the nearest quarter. Rounding must be fair — a policy that always rounds in the employer’s favour can take pay below the legal minimum for the hours actually worked. Keep the raw times on the time card and apply rounding only when totalling, so the original record is never lost.
Wages and Overtime: The UK Rules
There is no legal maximum working week for a single week, but the Working Time Regulations say average weekly working time must not exceed 48 hours over a 17-week period — workers can agree in writing to opt out of that limit. Workers are entitled to a 20-minute rest break when the working day is longer than 6 hours, and to 5.6 weeks of paid annual leave a year. On pay: the National Living Wage from 1 April 2026 is £12.71 an hour for workers aged 21 and over, £10.85 for 18 to 20 year olds, and £8.00 for under-18s and apprentices. Note that the £12.50 rate used in the shift table above is an example only — it sits below the current National Living Wage, so check the rate in the calculator against the current legal minimum for the worker’s age.
Related Calculators
Work out the pay behind these hours with the Hourly Wage Calculator, or plan the rota itself with the Shift Pattern Calculator.
Work Hours Calculator: Hours Worked in Hours and Minutes
Use this work time calculator as a work hours calculator or timesheet calculator. Hours worked = finish time − start time − unpaid breaks. A shift from 08:30 to 17:15 with a 45-minute unpaid lunch is 8 hours 45 minutes − 45 minutes = 8 hours.
Converting minutes to decimal hours
Payroll and invoices often need decimal hours. Divide the minutes by 60: 7 hours 45 minutes is 7.75 hours, 7 hours 20 minutes is 7.33 hours and 7 hours 30 minutes is 7.5 hours.
Weekly working hours
Add each day together for your weekly total. Five 7.5-hour days make 37.5 hours, a common full-time week in the UK.
Work Time & Pay FAQ
Everything you need to know about calculating your working hours, timesheets, and UK employment rights regarding pay and breaks.
To calculate your total hours worked, subtract your start time from your end time to get your gross shift length. Then, subtract any unpaid break durations. For example, if you clock in at 09:00 and clock out at 17:30 (8.5 hours) and take a 30-minute unpaid lunch, your total net hours worked is 8.0 hours. In payroll, this is often expressed in decimal format (8.00 hours) rather than hours and minutes.
In the UK, there is no statutory legal requirement for employers to pay extra for overtime, unless it takes your average working hours below the National Minimum Wage. However, most employment contracts specify overtime rates, typically ‘time and a half’ (1.5x your normal hourly rate) or ‘double time’ (2x). Always check your specific contract or employee handbook to see how overtime is calculated and whether it is guaranteed or voluntary.
The UK National Living Wage (for workers aged 21 and over) was set at £11.44 per hour in April 2024. The government typically reviews and increases this rate annually in April. For the most accurate and up-to-date figure for 2026, you should check the official GOV.UK website, as the rate is subject to annual adjustments based on economic recommendations.
Yes, this calculator is perfect for shift work. You can enter your specific shift start and end times, including night shifts that cross midnight. The calculator will automatically calculate the correct duration. Simply ensure you enter the correct break duration for your shift, as longer shifts (like 12-hour nursing or factory shifts) often have multiple breaks or longer unpaid meal periods.
To calculate your hourly rate from an annual salary, divide your gross annual salary by 52 (the number of weeks in a year) to get your weekly pay. Then, divide that weekly pay by the number of hours you work per week. For example, if you earn £30,000 a year and work 37.5 hours a week: £30,000 ÷ 52 = £576.92 per week. £576.92 ÷ 37.5 = £15.38 per hour.
Under the UK Working Time Regulations 1998, most workers have the right to one uninterrupted 20-minute rest break during their working day if they work more than 6 hours. Whether this break is paid or unpaid depends on the terms of your employment contract. Many employers offer unpaid lunch breaks, meaning this time is deducted from your total payable hours. Shorter ‘tea breaks’ or rest periods are often paid and included in working time.
Under the UK Working Time Regulations, you cannot work more than 48 hours a week on average. This average is usually calculated over a 17-week reference period. However, you can choose to ‘opt out’ of this 48-hour limit and work more if you wish. If you are under 18, the rules are stricter: you cannot work more than 8 hours a day or 40 hours a week, and you cannot opt out.
Most payroll systems and timesheets use decimal hours rather than minutes because it makes calculating pay much easier. To convert minutes to decimals, divide the minutes by 60. For example, 15 minutes is 0.25 hours, 30 minutes is 0.50 hours, and 45 minutes is 0.75 hours. A shift of 7 hours and 30 minutes is recorded as 7.50 hours in decimal format.
Take your finish time, subtract your start time, then subtract any unpaid breaks. Add the daily totals together for the week.
Divide the minutes by 60 and add the result to the hours. For example, 6 hours 15 minutes is 6.25 hours.
