Instantly convert French gauge (Fr) sizes to millimetres and inches. Accurate, free sizing calculator for catheters, tubing, wire and instrument diameters.
Calculate the Millimetre Size
Enter the French gauge (Fr) size below to get an instant, precise conversion to millimetres and inches, along with the equivalent circumference.
Gauge Converter
Enter the French size to see the millimetre equivalent
Typically ranges from 3 Fr to 36 Fr for catheters and tubing
Helps provide relevant context for the converted size
Converted Size
Based on the standard French (Charriere) scale
Everything to Know About the French Wire Gauge to Millimetres Converter Practical Guide
What this calculator does
The French Wire Gauge to Millimetres Converter is built to take the guesswork out of french wire gauge to millimetres converter. Instead of working through each step by hand, you enter your figures once and get a clear answer within seconds, which leaves you free to focus on what the number means for your unit conversion decision.
Who it helps
Students, online shoppers and travellers often turn to calculators like this one. Matching your own situation to the inputs takes only a moment, and you can repeat the process whenever your circumstances change. It often comes into play when comparing product sizes, doing homework and buying materials sold in other units, because a reliable figure for french wire gauge to millimetres converter prevents costly second-guessing.
Getting accurate results
Preparation pays off here. Try to double-check unusual values, then check the unit you start with. After that, enter the numbers in the French Wire Gauge to Millimetres Converter, read the answer, and repeat with a variation to test how stable the outcome really is.
Mistakes to avoid
When results seem off, the cause is frequently reading the wrong unit label or dropping a decimal place. Re-reading your inputs line by line is the quickest way to find and fix either one.
Reading your result
A good habit is to sense-check every answer. Ask whether it is the right size, whether gauge and wire have been entered sensibly, and whether rounding could be hiding something important. If you are unsure about a value, try a low and a high estimate and see how far apart the answers are. Bookmark this page so the French Wire Gauge to Millimetres Converter is always one tap away when you need it again.
A note on accuracy
The French Wire Gauge to Millimetres Converter is a practical guide for general information. Results depend entirely on the values you enter, so treat them as estimates and confirm anything important with a qualified professional or an official source.
French Gauge to Millimetres Reference Chart
Standard conversions for quick lookup when sizing catheters, tubing or wire against French gauge specifications.
| French Size (Fr) | Diameter (mm) | Diameter (inches) | Typical Use |
|---|---|---|---|
| 3 Fr | 1.00 mm | 0.039″ | Fine feeding tubes |
| 6 Fr | 2.00 mm | 0.079″ | Paediatric catheters |
| 9 Fr | 3.00 mm | 0.118″ | Small drainage tubes |
| 12 Fr | 4.00 mm | 0.157″ | Standard urinary catheter |
| 16 Fr | 5.33 mm | 0.210″ | Larger drainage catheter |
| 20 Fr | 6.67 mm | 0.263″ | Chest drain tubing |
| 24 Fr | 8.00 mm | 0.315″ | Large-bore chest drain |
| 28 Fr | 9.33 mm | 0.367″ | Wide surgical tubing |
| 32 Fr | 10.67 mm | 0.420″ | Extra-large drainage tube |
| 36 Fr | 12.00 mm | 0.472″ | Maximum common catheter size |
French Gauge Conversion FAQ
Everything you need to know about converting French gauge sizes to millimetres and inches.
To convert a French gauge (Fr) size to millimetres, divide the French size by 3. For example, a 12 French size divided by 3 equals a diameter of 4 millimetres.
1 French unit equals approximately 0.33 millimetres in diameter. This is because the French scale is defined so that 3 French units equal exactly 1 millimetre.
French gauge, also called the Charriere scale, is commonly used to size catheters, cannulas, endoscopes, surgical tubing and some wire or instrument diameters. It measures the outer diameter of a round object in units of one third of a millimetre.
No. French gauge is a direct, linear measurement of outer diameter, while American Wire Gauge (AWG) and Standard Wire Gauge (SWG) use non-linear numbering systems where a smaller number means a larger diameter. They cannot be directly compared without converting both to a common unit such as millimetres.
