Tile Calculator
Estimate the exact number of tiles needed for your floor or wall project. Calculate total area, factor in waste and cuts, and determine how many boxes to buy.
Tile Quantity Estimator
Enter your room and tile dimensions to calculate coverage
Standard is 10%. Use 15-20% for diagonal patterns.
Leave as 0 if buying individually.
Tile Estimation Results
Quantity, area, and packaging breakdown
Enter your room and tile dimensions, then click Calculate Tiles to see how many you need.
Practical Advice for the Tile Calculator Detailed Guide
What this calculator does
Whether you are checking a quick estimate or planning something properly, the Tile Calculator gives you a dependable starting point for tile. It is free to use, needs no sign-up, and works on phones, tablets and desktop screens alike.
Who it helps
From architects and designers, quantity surveyors and DIY renovators, the people who use the Tile Calculator share one goal: a trustworthy figure without wasted effort. Think about moments such as ordering the right amount of stock, estimating materials for a project and scheduling labour and delivery. Each one becomes simpler once tile has been worked out clearly.
Getting accurate results
Follow a simple routine each time you work out tile: measure twice and record each dimension, enter your values carefully, and then check supplier pack sizes. Repeating the same routine builds a reliable habit and makes your results easier to compare later.
Mistakes to avoid
Even careful users sometimes trip over forgetting a waste allowance, or end up skipping a final site measurement. Build a short pause into your routine to look for them, and your figures for tile will hold up much better.
Reading your result
Once you have a result, take time to interpret it. Figures linked to tile and construction rarely tell the whole story alone, so compare the answer with what you would expect in real life and note any assumptions you made. Bookmark this page so the Tile Calculator is always one tap away when you need it again. If you are unsure about a value, try a low and a high estimate and see how far apart the answers are. We update our tools regularly, so check back for improvements to tile and related construction calculators. Keeping a short note of each result makes it easy to compare options and explain your reasoning to others.
A note on accuracy
This Tile Calculator gives planning estimates only. Confirm final quantities on site and follow building regulations and professional advice for structural or safety-critical work.
Common Tile Sizes & Coverage
Standard tile dimensions and their approximate coverage area per tile.
| Tile Size (Metric) | Tile Size (Imperial) | Area per Tile |
|---|---|---|
| 100 x 100 mm | 4″ x 4″ | 0.01 m² (0.11 sq ft) |
| 300 x 300 mm | 12″ x 12″ | 0.09 m² (0.97 sq ft) |
| 600 x 600 mm | 24″ x 24″ | 0.36 m² (3.88 sq ft) |
| 300 x 600 mm | 12″ x 24″ | 0.18 m² (1.94 sq ft) |
| 800 x 800 mm | 32″ x 32″ | 0.64 m² (6.89 sq ft) |
Tile Calculator FAQ
Everything you need to know about estimating tiles for your next DIY or professional project.
To calculate the number of tiles needed, measure the length and width of the area you want to tile and multiply them to find the total area. Then, measure the length and width of a single tile and multiply them to find the tile area. Divide the total area by the tile area to get the base number of tiles. Finally, add 10-15% for waste and cuts. This calculator does all the math for you instantly.
The waste factor (or overage) is the extra percentage of tiles you should buy to account for cuts, breakage, and mistakes during installation. A standard waste factor is 10% for straightforward rectangular rooms and standard layouts. If you are tiling a diagonal pattern, a herringbone layout, or a room with many corners and obstructions, you should increase the waste factor to 15-20%.
Calculating by area (Total Area ÷ Tile Area) is generally accurate for estimating material. However, calculating by grid (Rows × Columns) is often more precise for rectangular rooms because it accounts for the fact that you cannot always use the offcut from one side of the room on the opposite side. This calculator provides both methods in the breakdown so you can choose the most appropriate number.
For diagonal or herringbone patterns, you will generate more cuts and waste than a standard straight layout. You should calculate your base number of tiles using the area method, but increase your waste factor from the standard 10% to 15-20%. This ensures you have enough full tiles to complete the intricate cuts required at the edges of the room.
The number of tiles in a box varies significantly depending on the size and thickness of the tile. For example, a box of large 600x600mm floor tiles might contain 4 tiles (covering 1.44 sq m), while a box of small 100x100mm mosaic tiles might contain 10 tiles (covering 1 sq m). Always check the packaging or the supplier’s website for the exact coverage per box, and enter that number into this calculator to find out how many boxes to buy.
Grout lines typically add 2-3mm between each tile. While this slightly reduces the number of tiles needed, the difference is usually negligible for large rooms. However, if you are using very small tiles (like mosaics) or very wide grout lines, it can add up. For most standard projects, you can ignore the grout line width in your initial calculation and rely on the 10% waste factor to cover any discrepancies.
Measure the longest length and the widest width of the room in a straight line. If your room is L-shaped or has alcoves, divide the space into smaller rectangular sections, calculate the area for each section separately, and then add them together. Always measure in the unit you are most comfortable with, and ensure you are measuring the actual floor or wall space, not just the skirting board length.
The standard waste percentage for tiles is 10%. This is sufficient for most standard rectangular rooms with a straight (grid) layout. If you are using large format tiles, tiling a diagonal pattern, or working in a room with many pillars, cabinets, or irregular angles, you should increase the waste factor to 15% or even 20% to ensure you don’t run out of tiles mid-project.
