Steroid Conversion Calculator 2026
Instantly calculate equivalent doses between corticosteroids. Convert prednisone, dexamethasone, hydrocortisone, and more based on standard glucocorticoid potency factors.
Corticosteroid Dose Input
Select your current steroid and enter the daily dose to find equivalents
Choose the corticosteroid you are currently taking or converting from.
Enter the total daily dose in milligrams (mg).
Equivalence Results
Glucocorticoid equivalent doses for standard corticosteroids
Select a steroid and enter a dose above, then click Calculate Equivalents to see the converted doses for other corticosteroids.
Getting the Most From the Steroid Conversion Calculator Full Walkthrough
What this calculator does
Think of the Steroid Conversion Calculator as a fast second opinion. You can run your own sums, enter the same details here, and see straight away whether steroid conversion lines up with what you expected.
Who it helps
From coaches and trainers, new parents and runners and cyclists, the people who use the Steroid Conversion Calculator share one goal: a trustworthy figure without wasted effort. Real-world uses range from planning meals around activity, comparing results over time and tracking progress over several weeks. These examples show why an accessible tool for steroid conversion is so valuable.
Getting accurate results
To work through steroid conversion with confidence, plan your inputs first. It is wise to measure at a consistent time and way, and equally helpful to use recent, accurate figures. Once the figures are entered, change one value at a time so you can see which factor has the biggest influence.
Mistakes to avoid
Even careful users sometimes trip over comparing yourself with averages that do not fit you, or end up ignoring age and activity level. Build a short pause into your routine to look for them, and your figures for steroid conversion will hold up much better.
Reading your result
After you calculate, look at the number in context. Conversion and steroid are the kind of details that can shift the picture, so keep a note of the inputs you used and revisit them if anything changes. Bookmark this page so the Steroid Conversion Calculator is always one tap away when you need it again. We update our tools regularly, so check back for improvements to steroid conversion and related health and fitness calculators. Because the calculation runs instantly in your browser, you can test as many scenarios as you like without any limit.
A note on accuracy
This Steroid Conversion Calculator is for general information and is not medical advice. If you have health concerns, or before changing diet or exercise, speak to a doctor or qualified health professional.
Corticosteroid Potency Chart
Standard glucocorticoid and mineralocorticoid potency comparisons. Note that equivalent doses are approximations and clinical response may vary.
| Drug | Glucocorticoid Potency | Equivalent Dose (mg) | Mineralocorticoid Potency | Half-Life |
|---|---|---|---|---|
| Hydrocortisone | 1 | 20 | 1 | Short (8-12h) |
| Cortisone | 0.8 | 25 | 0.8 | Short (8-12h) |
| Prednisone | 4 | 5 | 0.8 | Intermediate (12-36h) |
| Prednisolone | 4 | 5 | 0.8 | Intermediate (12-36h) |
| Methylprednisolone | 5 | 4 | 0.5 | Intermediate (12-36h) |
| Triamcinolone | 5 | 4 | 0 | Intermediate (12-36h) |
| Dexamethasone | 25-30 | 0.75 | 0 | Long (36-72h) |
| Betamethasone | 25-30 | 0.6 – 0.75 | 0 | Long (36-72h) |
For clinicians only. This page is educational information for healthcare professionals. Steroid conversions are estimates based on anti-inflammatory potency only. Confirm every dose change with a clinician or pharmacist before acting on it, and never adjust a prescribed steroid dose on the basis of a calculator alone.
Corticosteroid Potency Table
Equivalent dose is the dose in milligrams that gives the same anti-inflammatory effect as 20 mg of hydrocortisone (or 5 mg of prednisone). Anti-inflammatory and mineralocorticoid potency are relative to hydrocortisone = 1. Biological half-life is the duration of tissue effect, which is longer than the plasma half-life and is what sets dosing frequency.
| Steroid | Equivalent dose | Anti-inflammatory potency | Mineralocorticoid potency | Biological half-life |
|---|---|---|---|---|
| Hydrocortisone | 20 mg | 1 | 1 | 8–12 hours (short) |
| Cortisone | 25 mg | 0.8 | 0.8 | 8–12 hours (short) |
| Prednisone | 5 mg | 4 | 0.6 | 12–36 hours (intermediate) |
| Prednisolone | 5 mg | 4 | 0.6 | 12–36 hours (intermediate) |
| Methylprednisolone | 4 mg | 5 | Negligible | 12–36 hours (intermediate) |
| Triamcinolone | 4 mg | 5 | None | 12–36 hours (intermediate) |
| Dexamethasone | 0.75 mg | 25–30 | None | 36–72 hours (long) |
| Betamethasone | 0.6 mg | 25–30 | None | 36–72 hours (long) |
Sources: ClinCalc corticosteroid reference and MDCalc steroid conversion calculator, cross-checked against Katzung’s Basic and Clinical Pharmacology and Paragliola et al. (2017). Published tables differ slightly: some give dexamethasone and betamethasone as 0.8 mg with a potency of 25, and prednisone/prednisolone mineralocorticoid potency as 0.8 rather than 0.6. The figures above follow the most widely used values. These equivalences apply to oral and intravenous administration only — topical, inhaled, intra-articular and intramuscular forms are not covered, because their relative potency can differ considerably.
Worked Examples: Converting Between Steroids
The conversion is a simple ratio: new dose = current dose ÷ equivalent dose of the current steroid × equivalent dose of the new steroid.
Prednisone to hydrocortisone: 40 mg prednisone ÷ 5 × 20 = 160 mg hydrocortisone.
Hydrocortisone to prednisolone: 100 mg hydrocortisone ÷ 20 × 5 = 25 mg prednisolone.
Dexamethasone to prednisone: 6 mg dexamethasone ÷ 0.75 × 5 = 40 mg prednisone.
Methylprednisolone to prednisone: 32 mg methylprednisolone ÷ 4 × 5 = 40 mg prednisone.
Prednisone to dexamethasone: 10 mg prednisone ÷ 5 × 0.75 = 1.5 mg dexamethasone.
Triamcinolone to methylprednisolone: 40 mg triamcinolone ÷ 4 × 4 = 40 mg methylprednisolone.
Cortisone to dexamethasone: 100 mg cortisone ÷ 25 × 0.75 = 3 mg dexamethasone.
When to Use, Pearls and Next Steps
When to use a conversion: when switching a patient from one systemic corticosteroid to another — for example, changing from prednisolone to dexamethasone, or comparing the anti-inflammatory strength of two regimens. The conversion estimates an equivalent anti-inflammatory dose; it does not account for mineralocorticoid effects, so it must not be used to plan physiological adrenal replacement dosing.
Pearls: dexamethasone and betamethasone have no mineralocorticoid activity, so they must not be used for long-term physiological replacement. When switching to a steroid with a shorter half-life, consider increasing the dosing frequency; when switching to a longer-acting steroid, the frequency can usually be reduced. Dexamethasone’s very long half-life means a single daily dose — or even alternate-day dosing — is often enough for inflammatory conditions. Fludrocortisone is not in the table because it is used for its mineralocorticoid effect, not its anti-inflammatory effect.
Next steps: after converting, review the dose against the indication, check whether the new steroid’s mineralocorticoid activity (or lack of it) changes anything for the patient, adjust the dosing interval for the new drug’s half-life, and arrange monitoring for blood pressure, blood glucose, weight and mood — the standard checks for systemic steroids.
Tapering Steroids: Stopping Safely
How a steroid is stopped depends on how long it has been taken. Glucocorticoids taken for less than 3 to 4 weeks, even at relatively high doses, rarely cause significant adrenal (HPA axis) suppression, and can usually be stopped abruptly without tapering or testing. After more than 3 to 4 weeks of a dose above the physiological level, the adrenal glands may have switched off their own cortisol production, and stopping suddenly risks adrenal crisis.
For longer courses, taper in two phases. First, reduce the dose to near-physiological levels — about 5 mg of prednisolone a day — as fast as the underlying disease allows. Then taper more slowly from there, watching for signs of adrenal insufficiency. Morning serum cortisol testing can be used to check whether the adrenal glands have recovered and to guide the final steps of the taper. If withdrawal symptoms appear during tapering, the usual approach is to return briefly to the last tolerated dose and then taper more slowly. These principles follow the joint European Society of Endocrinology and Endocrine Society guideline on glucocorticoid tapering (2024), summarised in Australian Prescriber (2025). The exact taper schedule is a clinical decision for the treating clinician.
References
- ClinCalc — Corticosteroid Conversion Calculator reference table.
- MDCalc — Steroid Conversion Calculator.
- Katzung’s Basic and Clinical Pharmacology — corticosteroid comparison table.
- Paragliola et al. (2017) — pharmacological properties of cortisol and synthetic glucocorticoids (PMC).
- European Society of Endocrinology and Endocrine Society joint clinical practice guideline on glucocorticoid tapering and glucocorticoid-induced adrenal insufficiency (2024), summarised in Australian Prescriber, 2025;48(4):116–121.
Related: work out bsa.
Related: work out creon dose.
Steroid Conversion FAQ
Everything you need to understand corticosteroid equivalence, from basic potency factors to clinical considerations.
A corticosteroid equivalence calculator is a medical tool used to determine the equivalent dose of one corticosteroid when switching a patient to another. Because different steroids have varying potencies (e.g., dexamethasone is much stronger than hydrocortisone), this calculator uses standard glucocorticoid potency factors to ensure the patient receives a therapeutically similar dose.
Steroid doses are converted using standard equivalence factors relative to a baseline, often hydrocortisone (20 mg) or prednisone (5 mg). For example, 5 mg of prednisone is roughly equivalent to 4 mg of methylprednisolone, 0.75 mg of dexamethasone, or 20 mg of hydrocortisone in terms of anti-inflammatory (glucocorticoid) effect.
Dexamethasone is a long-acting, highly potent synthetic corticosteroid. Its glucocorticoid potency is approximately 25 to 30 times greater than that of hydrocortisone, and about 6 to 7 times greater than prednisone. Therefore, a much smaller milligram dose is required to achieve the same anti-inflammatory effect.
This calculator primarily focuses on glucocorticoid (anti-inflammatory) equivalence. While some steroids like hydrocortisone have significant mineralocorticoid (salt-retaining) activity and others like dexamethasone have virtually none, clinical dose conversions usually prioritize glucocorticoid equivalence. However, doctors must consider mineralocorticoid effects separately when managing fluid balance or blood pressure.
No. This calculator is for educational and reference purposes only. Steroid conversions are not always strictly 1:1 in clinical practice due to differences in pharmacokinetics, individual patient metabolism, and the specific condition being treated. Never adjust your medication doses without direct supervision from a qualified healthcare professional.
