calculatorsonline.co.uk
Piling Layout Coordinate Calculator
Generate the coordinates and extent of a grid of piles from the start point, spacing and pile count.
π Free Online Tool
β‘ Instant Results
π Clear Comparison
π 100% Free Tool
Free Construction Tool
Compare Your Options And Get Clear Answers
Generate the coordinates and extent of a grid of piles from the start point, spacing and pile count.
Piling Layout Coordinate Estimator
Enter your numbers below for an instant estimate.
0
π‘ Tip: Check diagonals on site. Equal diagonals on a rectangle confirm the grid is square.
How It Works
Key concepts behind this calculator
1
Set Start
Enter the first pile coordinates.
2
Add Spacing
Enter X and Y spacing.
3
Count
Piles in each direction.
4
Check
Verify diagonals on site.
Quick Reference Guide
Piling Tolerances
Typical setting out checks.
| Check | Typical Value | Unit | Note |
|---|---|---|---|
| Position tolerance | 75 | mm | Typical |
| Verticality | 1 in 75 | ratio | Typical |
| Diagonal check | equal | n/a | Rectangles |
| Spacing | 3 x diameter | min | Rule |
| Rule of Thumb | Check inputs | Use as a guide | Round sensibly |
Common Questions
Piling Layout Coordinate Calculator FAQ
Answers to common questions about this calculator.
From a control grid using a total station or GPS.
Often three times the pile diameter.
Equal diagonals prove a rectangle is square.
No. Verify with a surveyor.