ISO Tolerance Grade Calculator
Estimate the IT tolerance width for a nominal size and grade.
Compare Your Options And Get Clear Answers
Estimate the IT tolerance width for a nominal size and grade.
ISO Tolerance Grade Estimator
Enter your numbers below for an instant estimate.
How It Works
Key concepts behind this calculator
Enter Values
Fill in each field with your own numbers.
Calculate
Results update as you change the inputs.
Review
Read the breakdown and the explanation.
Adjust
Change values to compare scenarios.
ISO Quick Guide
Typical values for reference.
| Size (mm) | IT grade | Spare | Tolerance (um) |
|---|---|---|---|
| 25 | 7 | 0 | 21.5 um |
| 50 | 6 | 0 | 17.1 um |
| 10 | 8 | 0 | 24.5 um |
| 100 | 9 | 0 | 87.5 um |
| Rule of Thumb | Check inputs | Use as a guide | Round sensibly |
ISO Tolerance Grade Calculator FAQ
Answers to common questions about this calculator.
It uses the formula shown with your inputs. Real conditions vary, so treat it as a guide.
T = multiplier x i, i = 0.45 cbrt(D) + 0.001 D
It is an estimate based on the inputs you enter. Check real quotes, labels or official guidance for important decisions.
Yes. Replace each input with your own figures and the result updates instantly.