Feet To Mm Calculator 2026
Instantly convert feet and inches to millimeters, centimeters, and meters. Perfect for engineering, DIY projects, construction, and imperial to metric length conversions.
Length Conversion
Enter your distance in feet and inches to convert to millimeters
Enter the whole number of feet.
Enter the remaining inches (0-11).
Choose how many decimal places to show in the results.
Your Length Conversion
Millimeters, centimeters, meters, and exact formula breakdown
Enter your feet and inches above and click Convert to Millimeters to reveal your metric length conversion results.
You can also calculate inch mm here.
Practical Advice for the Feet To Mm Calculator Detailed Guide
What this calculator does
Time is precious, and feet to mm should not eat into it. With the Feet To Mm Calculator, you can try several scenarios in a minute or two and compare the results side by side before you commit to anything.
Who it helps
Engineers, students and cooks often turn to calculators like this one. Matching your own situation to the inputs takes only a moment, and you can repeat the process whenever your circumstances change. Think about moments such as doing homework, following a recipe from abroad and buying materials sold in other units. Each one becomes simpler once feet to mm has been worked out clearly.
Getting accurate results
Use the Feet To Mm Calculator as part of a short checklist. Begin by choosing to double-check unusual values. Next, confirm whether UK or US units apply. Finally, compare the answer with your own expectation, and look again at any input if the two are far apart.
Mistakes to avoid
Some mistakes appear again and again when people calculate feet to mm. Typical examples are confusing US and UK measures and dropping a decimal place. Spotting these early keeps your result trustworthy and saves time later.
Reading your result
Treat the output as one piece of evidence rather than a final verdict. Think about how feet and conversion might change if your situation shifted, and repeat the calculation with updated values when it does. Keeping a short note of each result makes it easy to compare options and explain your reasoning to others. If you are unsure about a value, try a low and a high estimate and see how far apart the answers are. We update our tools regularly, so check back for improvements to feet to mm and related unit conversion calculators. Clear inputs lead to clear answers, so take a few extra seconds to read each label on the calculator before typing.
A note on accuracy
Remember that the Feet To Mm Calculator works with the information you supply. For anything critical, double-check the details independently or ask someone qualified to review your figures.
Common Length Conversions
Quickly reference standard length conversions between feet, inches, and millimeters for everyday and construction use.
| Feet & Inches | Millimeters (mm) | Centimeters (cm) | Common Examples |
|---|---|---|---|
| 1 ft 0 in | 304.8 mm | 30.48 cm | Standard ruler length (12 inches) |
| 2 ft 0 in | 609.6 mm | 60.96 cm | Height of a standard desk |
| 3 ft 0 in | 914.4 mm | 91.44 cm | Width of a doorway |
| 5 ft 0 in | 1524.0 mm | 152.4 cm | Height of a standard door |
| 5 ft 7 in | 1701.8 mm | 170.18 cm | Average adult human height |
| 6 ft 0 in | 1828.8 mm | 182.88 cm | Standard ceiling height (partial) |
| 10 ft 0 in | 3048.0 mm | 304.8 cm | Room width, shipping container |
| 100 ft 0 in | 30480.0 mm | 3048.0 cm | Tennis court length |
The Exact Conversion: 1 Foot Is 304.8 Millimetres
One foot is exactly 304.8 millimetres — not approximately, but exactly, because the foot and the inch are now defined in metric terms. One inch is exactly 25.4 millimetres, and one foot is 12 inches, so 12 × 25.4 = 304.8 mm. That means every feet-to-millimetres conversion is a single multiplication: feet × 304.8 = millimetres. Fifteen feet is 15 × 304.8 = 4,572 mm. One hundred feet is 30,480 mm, and 1,000 feet is 304,800 mm. To go the other way, divide by 304.8: 1,000 mm is 1,000 ÷ 304.8 = 3.2808 feet, and 5,000 mm is 16.4042 feet.
Feet Plus Inches, with Fractions to 1/64 of an Inch
Real measurements are rarely whole feet — they are feet plus inches, and often inches plus a fraction. The method is to convert everything to inches first, then multiply by 25.4. Five feet 7 inches is 67 inches, and 67 × 25.4 = 1,701.8 mm. A fraction of an inch is a fraction of 25.4 mm: 1/2 inch is 12.7 mm, 1/4 inch is 6.35 mm, 1/8 inch is 3.175 mm, 1/16 inch is 1.5875 mm, 1/32 inch is 0.79375 mm, and 1/64 inch is 0.396875 mm. So 5 feet 7 and 1/2 inches is 67.5 inches × 25.4 = 1,714.5 mm, and 3 feet 2 and 3/8 inches is 38.375 inches × 25.4 = 974.725 mm. The calculator on this page accepts feet, inches and fractions down to 1/64, which is the finest division on most tape measures and rulers.
| Fraction of an inch | Millimetres | Fraction of an inch | Millimetres |
|---|---|---|---|
| 1/64 | 0.3969 | 1/4 | 6.35 |
| 1/32 | 0.7938 | 3/8 | 9.525 |
| 1/16 | 1.5875 | 1/2 | 12.7 |
| 1/8 | 3.175 | 5/8 | 15.875 |
| 3/16 | 4.7625 | 3/4 | 19.05 |
| 7/8 | 22.225 | 1 inch | 25.4 |
Worked Example: 15 Feet
Fifteen feet is a common length — a room, a run of pipe, a length of timber — so here it is worked out in full. Fifteen feet is 15 × 12 = 180 inches, and 180 × 25.4 = 4,572 mm, which is 4.572 metres. Fifteen feet 6 inches is 15.5 feet: 15.5 × 304.8 = 4,724.4 mm, or 4.724 metres. If you need the answer in metres plus millimetres, split the result: 4,572 mm is 4 metres and 572 millimetres, and 4,724.4 mm is 4 metres and 724.4 millimetres. The same method works for any length: convert feet and inches to total inches, multiply by 25.4, and you have millimetres.
Conversion Tables: 0.01 to 100 Feet, and 0.01 to 1,000 Feet
The tables below cover the ranges people search for most. The first table goes from a hundredth of a foot to 100 feet in steps; the second covers whole feet from 1 to 10; and the third runs from 0.01 feet to 1,000 feet for large measurements such as cable runs and site dimensions. All values are feet × 304.8, rounded to two decimal places where needed.
| Feet | Millimetres | Feet | Millimetres |
|---|---|---|---|
| 0.01 | 3.05 | 10 | 3,048 |
| 0.1 | 30.48 | 25 | 7,620 |
| 0.5 | 152.4 | 50 | 15,240 |
| 1 | 304.8 | 75 | 22,860 |
| 2 | 609.6 | 100 | 30,480 |
| 5 | 1,524 | 500 | 152,400 |
| 7.5 | 2,286 | 1,000 | 304,800 |
| Feet | Millimetres | Metres | Feet | Millimetres | Metres |
|---|---|---|---|---|---|
| 1 | 304.8 | 0.305 | 6 | 1,828.8 | 1.829 |
| 2 | 609.6 | 0.610 | 7 | 2,133.6 | 2.134 |
| 3 | 914.4 | 0.914 | 8 | 2,438.4 | 2.438 |
| 4 | 1,219.2 | 1.219 | 9 | 2,743.2 | 2.743 |
| 5 | 1,524 | 1.524 | 10 | 3,048 | 3.048 |
Metres Plus Millimetres: Reading the Split Output
The calculator on this page can show the answer split into metres and millimetres, which is how metric lengths are usually written on drawings and cutting lists. The rule is simple: divide the millimetres by 1,000, keep the whole number as metres, and the remainder is millimetres. So 4,572 mm is 4 metres and 572 mm, written 4 m 572 mm; 1,701.8 mm is 1 metre and 701.8 mm; and 30,480 mm is 30 metres and 480 mm. If the remainder has a decimal, round it to the nearest millimetre for cutting — 701.8 mm becomes 702 mm — unless the job needs sub-millimetre accuracy, in which case keep one decimal place.
Accuracy and Significant Figures: How Precise Is the Answer?
Because the conversion is exact, the accuracy of the answer depends entirely on the accuracy of the measurement you started with. A length measured to the nearest inch is only accurate to about 25 mm, so quoting the converted figure to three decimal places is false precision: 5 feet 7 inches is 1,701.8 mm, but if the tape was read to the nearest inch, the honest answer is about 1,702 mm. A length measured to the nearest 1/16 inch is accurate to about 1.6 mm, so two decimal places are justified. As a rule, keep the same number of significant figures in the answer as in the measurement: a 3-significant-figure measurement such as 5.25 feet gives a 3-significant-figure answer of 1,600 mm (5.25 × 304.8 = 1,600.2 mm, rounded to 1,600 mm). The calculator on this page shows the full precision of the multiplication, and it is up to you to round it to what your tape measure actually supports.
Unit Definitions: Foot, Inch, Millimetre and Metre
A millimetre is one thousandth of a metre, and the metre is defined by the speed of light: it is the distance light travels in a vacuum in 1/299,792,458 of a second. An inch is now defined as exactly 25.4 millimetres, and a foot is 12 inches, so exactly 304.8 millimetres. The imperial units were fixed to the metric system by international agreement in 1959, which is why the conversion has no rounding error — the foot is a metric unit in disguise. A yard is 3 feet, or 914.4 mm, and a mile is 5,280 feet, or 1,609.344 metres.
How many millimetres are in a foot?
Exactly 304.8 millimetres. Multiply any number of feet by 304.8 to get millimetres.
How do I convert feet and inches together?
Convert the feet to inches (multiply by 12), add the inches, then multiply the total inches by 25.4. For 5 feet 7 inches: 5 × 12 + 7 = 67 inches, and 67 × 25.4 = 1,701.8 mm.
What is 0.01 feet in millimetres?
0.01 feet is 3.048 mm, which rounds to 3.05 mm. A hundredth of a foot is just over 1/8 of an inch.
Related: work out mm cm.
Related: calculate um mm.
Feet To Mm Calculator FAQ
Everything you need to know about converting feet and inches to millimeters, understanding imperial to metric conversions, and tracking your measurements.
To convert feet to millimeters, multiply your length value by 304.8. For example, if you have 5 feet, the calculation is 5 × 304.8 = 1,524 millimeters. This calculator automates this process for you instantly.
There are exactly 304.8 millimeters in one foot. This is because there are 12 inches in a foot, and each inch is exactly 25.4 millimeters (12 × 25.4 = 304.8).
First, convert the feet to inches by multiplying by 12, then add the remaining inches. Finally, multiply the total inches by 25.4 to get millimeters. For example, 5 feet 7 inches is (5 × 12) + 7 = 67 inches. 67 × 25.4 = 1,701.8 mm.
Converting feet to millimeters is essential in engineering, architecture, manufacturing, and DIY projects where precise metric measurements are required. It ensures compatibility with metric tools, materials, and international standards.
Yes, the conversion is exact. Since 1959, the international yard and pound agreement defined the inch as exactly 25.4 millimeters. Therefore, any conversion from feet or inches to millimeters using this factor is 100% precise.
To convert millimeters back to feet, divide your millimeter value by 304.8. For example, 1,524 mm ÷ 304.8 = 5 feet. To get the remaining inches, multiply the decimal part by 12.
