calculatorsonline.co.uk
Feed per Tooth Calculator
Chip load.
🧮 Free Online Tool
⚡ Instant Results
📊 Clear Breakdown
🔒 100% Free Tool
Feed
Work It Out And Get Clear Answers
Chip load.
Feed per Tooth Estimator
Enter your numbers below for an instant estimate.
0
Fz = F ÷ (n × z).
💡 Tip: Fz = F ÷ (n × z).
How It Works
Key concepts behind this calculator
1
Enter Values
Fill in each field with your own numbers.
2
Calculate
Press Calculate to see the result.
3
Review
Read the breakdown and the explanation.
4
Adjust
Change values to compare scenarios.
Quick Reference Guide
Feed per Tooth Quick Guide
Typical values for reference.
| Feed rate (mm/min) | Spindle speed (rpm) | Flutes | Feed per tooth |
|---|---|---|---|
| 800 | 10,000 | 2 | 0.04 mm |
| 400 | 10,000 | 2 | 0.02 mm |
| 1,600 | 10,000 | 2 | 0.08 mm |
| 800 | 5,000 | 2 | 0.08 mm |
| 800 | 20,000 | 2 | 0.02 mm |
| Rule of thumb: check your inputs, use the result as a guide and round sensibly. | |||
Common Questions
Feed per Tooth FAQ
Answers to common questions about this calculator.
Fz = F ÷ (n × z).
It uses the default inputs shown and the formula described above. Change any value and press Calculate to see how the result moves.
It is an estimate based on the inputs you enter. Check real quotes, labels, product data or official guidance for important decisions.
Yes. Replace each input with your own figures and press Calculate to update the result.