Concrete Weight Calculator 2027

calculatorsonline.co.uk

Concrete Weight Calculator

Calculate the weight of concrete slabs, footings, and columns by volume or dimensions. Supports standard, reinforced, and lightweight concrete in kg, lbs, and tons.

🧱 Concrete Weight
📐 Volume Calculator
⚖️ Density Guide
📦 Bag Estimator

Concrete Weight Calculator

Calculate weight by dimensions or volume

Slab Dimensions

Select the unit for all dimensions above

Quick examples:

Concrete Details

Standard is most common for slabs and patios

Choose your preferred unit for the final weight

Your Concrete Weight

Volume, density and bag equivalents

🧱

Enter your slab dimensions and select a concrete type, then click Calculate to see the total weight and volume.

If you need to calculate paper weight, this is a quick way to do it.

For a quick check, use our aluminium weight calculator.

How to Use the Concrete Weight Calculator In-Depth Notes

What this calculator does

The idea behind the Concrete Weight Calculator is simple: give everyone, from beginners to experienced users, a tool that makes concrete weight quick and transparent. Every field is clearly labelled and nothing sits behind a paywall.

Who it helps

You may find it especially handy if you are among quantity surveyors, site managers and builders and contractors. Having a dependable answer for concrete weight close at hand makes planning less stressful. Real-world uses range from checking a quote from a contractor, comparing two design options and scheduling labour and delivery. These examples show why an accessible tool for concrete weight is so valuable.

Getting accurate results

Start with the basics: write down what you already know, and try to check supplier pack sizes. It also pays to confirm requirements with local building guidance. With clean inputs in place, the Concrete Weight Calculator does the heavy lifting and you can concentrate on interpreting the answer.

Mistakes to avoid

Watch out for using nominal sizes instead of actual sizes. Another frequent slip is measuring in mixed units. A moment spent checking these two points can make concrete weight noticeably more dependable.

Reading your result

Results are most useful when you understand what drives them. Experiment with weight and concrete in turn, and you will quickly see which one matters most for concrete weight. The layout is designed for readability, so you can use the Concrete Weight Calculator comfortably on a small screen while on the move. Because the calculation runs instantly in your browser, you can test as many scenarios as you like without any limit. Share the page with colleagues, friends or family if they are working through concrete weight as well. Keeping a short note of each result makes it easy to compare options and explain your reasoning to others.

A note on accuracy

This Concrete Weight Calculator gives planning estimates only. Confirm final quantities on site and follow building regulations and professional advice for structural or safety-critical work.

Concrete Weight Benchmarks

Quick reference guide for the density and weight of different concrete types.

Concrete Type Density (kg/m³) Density (lbs/ft³) Weight per m³ Weight per yd³
Standard24001505,291 lbs4,050 lbs
Reinforced25001565,511 lbs4,212 lbs
Lightweight18001123,968 lbs3,024 lbs

How Concrete Weight Is Worked Out

Concrete weight is volume × density. Measure the volume in cubic metres — length × width × depth for a slab — then multiply by the density of the mix in kilograms per cubic metre. Standard Portland cement concrete weighs about 2,400 kg/m³ when freshly poured and about 2,200 kg/m³ once cured, because some water evaporates as it sets. That difference matters when you order: the lorry brings fresh concrete, so order by the fresh weight, and the finished slab weighs less.

Worked Example: 15 m³ of Portland Concrete

A 15 m³ pour of standard Portland concrete weighs 15 × 2,400 = 36,000 kg, or 36 tonnes, when fresh. Once cured it weighs about 15 × 2,200 = 33,000 kg, or 33 tonnes — about 3 tonnes of water lost as the concrete sets. A standard ready-mix lorry carries 6 to 8 m³, so 15 m³ needs two full loads, and the supplier will plan the pour in two parts.

Worked Example: A 3 m × 10 m Slab, 100 mm Thick

A driveway slab 3 m wide, 10 m long and 100 mm (0.1 m) thick has a volume of 3 × 10 × 0.1 = 3 m³. Fresh, that is 3 × 2,400 = 7,200 kg, or 7.2 tonnes; cured, it is 3 × 2,200 = 6,600 kg, or 6.6 tonnes. With a 10% waste factor for spillage and uneven ground, order 3 × 1.10 = 3.3 m³, which weighs 3.3 × 2,400 = 7,920 kg fresh. At a guide price of £125 per m³ for ready-mix C25 concrete, 3.3 m³ costs 3.3 × £125 = £412.50 before VAT, or £495 with 20% VAT — and a load under 4 m³ usually attracts a part-load charge of about £20 to £50 per m³, so ask the supplier for the delivered price before ordering.

Five Concrete Types and Their Densities

Concrete typeDensityWeight of 15 m³Used for
Normal-weight (Portland), fresh2,400 kg/m³36,000 kgSlabs, foundations, driveways
Normal-weight (Portland), cured2,200 kg/m³33,000 kgFinished weight of the same pour
Reinforced concrete2,500 kg/m³37,500 kgBeams, columns, structural slabs
Lightweight concrete1,440–1,850 kg/m³About 24,000 kg at 1,600 kg/m³Floor screeds, roof decks, blocks
Heavyweight concrete3,200–3,800 kg/m³About 54,000 kg at 3,600 kg/m³Radiation shielding, counterweights

Fresh vs Cured: Why the Calculator Shows Two Weights

Fresh concrete contains all its mixing water, so it is at its heaviest when it arrives — about 2,400 kg/m³ for a standard mix. As it cures, water evaporates and the concrete settles to about 2,200 kg/m³. Use the fresh weight when you order, when you check the lorry’s load, and when you work out whether the ground or the formwork can take it. Use the cured weight for the finished structure — for example, when you check whether a floor or a roof can carry a concrete slab. The difference is about 8%: 15 m³ loses about 3 tonnes between the pour and the finished slab.

Shapes: Circular Slabs and Columns

A circular slab uses π × radius² × depth. A round patio 4 m across (radius 2 m) and 150 mm thick is π × 2² × 0.15 = 1.885 m³, which weighs 1.885 × 2,400 = 4,524 kg fresh. A column uses π × radius² × height: a column 500 mm across (radius 0.25 m) and 3 m tall is π × 0.25² × 3 = 0.589 m³, weighing 0.589 × 2,400 = 1,414 kg. Always measure the radius, not the diameter — using the diameter in the formula gives four times the true volume.

Waste Factor and How Much to Order

Order 5% to 10% more than the calculated volume. Ground is never perfectly level, formwork flexes, and some concrete is always lost in the pump, the barrow and the chute. For a 3 m³ slab, 10% waste means ordering 3.3 m³; for a 15 m³ pour, 5% means 15.75 m³. Under-ordering is worse than over-ordering: a second small delivery costs more per cubic metre than the first load, and a cold joint where fresh concrete meets partly set concrete is a weak point in the slab.

Cost Estimate: Material, Delivery and Bags

Ready-mix C20 to C25 concrete cost about £110 to £140 per m³ plus VAT in the UK in 2026, with London and the South East at the top of the range. At a mid-range £125 per m³, a 15 m³ pour costs 15 × £125 = £1,875 before VAT and £2,250 with VAT. Delivery is usually included in the per-cubic-metre price for a full load, but loads under 4 to 6 m³ attract a part-load charge of about £20 to £50 per m³, and volumetric (mixed-on-site) trucks charge about £115 to £140 per m³ with no part-load penalty. Bagged concrete is far dearer: a 25 kg bag costs about £4.25 and yields about 0.012 m³, so one cubic metre needs about 83 bags at about £353, and 3 m³ needs 250 bags at about £1,063 — more than twice the ready-mix price, before mixer hire. Labour is charged separately and varies by job, so ask for a supplied-and-laid price from the contractor rather than guessing a rate.

Frequently Asked Questions

How heavy is 1 m³ of concrete? About 2,400 kg (2.4 tonnes) fresh and 2,200 kg (2.2 tonnes) cured, for standard Portland concrete. How many 25 kg bags make 1 m³? About 83 bags, because each bag yields about 0.012 m³ — and it costs roughly £350 in bags against about £125 for ready-mix. How much concrete do I need for a 3 m × 10 m slab at 100 mm? 3 m³, plus 10% waste, so order 3.3 m³. Does reinforced concrete weigh more? Yes — about 2,500 kg/m³, because of the steel. How long does concrete take to cure? It is walkable in 24 to 48 hours and reaches most of its strength in about 28 days, but it keeps curing for months. Can I pour concrete in the rain? Light rain is fine if the surface is covered, but heavy rain washes cement out of the mix and weakens it.

How Much Does Concrete Weigh?

Standard concrete weighs about 2,400 kg per cubic metre (2.4 tonnes per m³). Reinforced concrete is a little heavier, at around 2,500 kg/m³.

Working out the weight of a slab

Weight = length × width × thickness (in metres) × 2,400. A 4 m × 3 m slab, 100 mm thick, is 1.2 m³ and weighs about 2,880 kg.

Why weight matters

Use the weight to check floor loads, choose a skip for broken concrete, or plan how many trips a trailer needs. Ready-mix trucks typically carry up to 6–8 m³.

Concrete Weight FAQ

Everything you need to know about concrete density, volume, and weight calculations.

The weight of concrete depends on its type and density. Standard concrete weighs approximately 2400 kg per cubic meter (150 lbs per cubic foot). Reinforced concrete is slightly heavier at about 2500 kg/m³ (156 lbs/ft³) due to the steel rebar. Lightweight concrete, used for reducing structural load, weighs around 1800 kg/m³ (112 lbs/ft³).

To calculate the weight of a concrete slab, first find its volume by multiplying the length, width, and thickness. Ensure all measurements are in the same units. Then, multiply the volume by the density of the concrete. For standard concrete, multiply the volume in cubic meters by 2400 to get the weight in kilograms, or multiply cubic feet by 150 to get pounds.

The density of reinforced concrete is typically 2500 kg/m³ (156 lbs/ft³ or 4212 lbs/yd³). This is slightly higher than standard concrete (2400 kg/m³) because of the embedded steel reinforcement bars (rebar), which are much denser than the concrete matrix itself.

To estimate the number of bags needed, calculate the total weight of your project and divide by the bag weight. For example, if your slab requires 1000 kg of concrete, you would need 40 bags of 25kg concrete mix, or 50 bags of 20kg mix. This calculator automatically provides bag equivalents based on your calculated volume and weight.

Yes, freshly mixed (wet) concrete is heavier than cured (dry) concrete due to the water content. However, the weights used in construction and structural calculations (like 2400 kg/m³) typically refer to the cured, hardened density. The water chemically binds with the cement during hydration, so the overall mass remains largely the same, but excess mixing water evaporates, slightly reducing the final weight.

A cubic yard of standard concrete weighs approximately 4050 pounds (1837 kg). This is calculated by multiplying the density of standard concrete (150 lbs/ft³) by 27, since there are 27 cubic feet in a cubic yard. For reinforced concrete, a cubic yard weighs about 4212 pounds.

About 2,400 kg, or 2.4 tonnes.

Multiply its volume in m³ by 2,400 kg. A 1 m² slab 100 mm thick weighs about 240 kg.

Similar Posts