Wind Speed Calculator

calculatorsonline.co.uk

Wind Speed Calculator

Instantly convert wind speed between knots, mph, km/h, and m/s. Perfect for sailors, pilots, meteorologists, and outdoor enthusiasts.

🌬️ Multi-Unit Conversion
Beaufort Scale Included
🇬🇧 Imperial & Metric
🔒 100% Free Tool

Convert Wind Velocity

Enter your wind speed value and select the unit below to instantly see the equivalent measurements across all major systems, along with the corresponding Beaufort scale classification.

Wind Speed Converter

Get instant conversions and Beaufort scale context.

Enter the numerical wind speed.
Select the unit of your input value.
Force 3: Gentle Breeze
0.00
Knots (kt)
0.00
Miles per Hour (mph)
Kilometers per Hour (km/h): 0.00
Meters per Second (m/s): 0.00
Feet per Minute (ft/min): 0.00
*Conversions are based on international standard definitions (1 knot = 1.852 km/h exactly). Beaufort scale is an empirical estimate.
💡 Sailing Tip: Wind speed can vary significantly at different altitudes. Surface wind (measured at 10 meters) is typically 20–30% slower than wind aloft due to friction with the ground or sea surface.
1

The Beaufort Scale

Developed in 1805, this scale relates wind speed to observable conditions at sea or on land, ranging from Force 0 (Calm) to Force 12 (Hurricane).

2

Measurement Tools

Wind speed is measured using an anemometer. Traditional models use rotating cups, while modern meteorological stations often use ultrasonic sensors.

3

Gusts vs. Sustained Wind

Meteorological reports typically cite "sustained" wind speed (averaged over 10 minutes). "Gusts" are brief, sudden increases in speed, often 1.5x the sustained rate.

4

Safety Thresholds

For recreational activities, winds above 20 knots (Force 5) require caution for small boats, and winds above 30 knots (Force 7) are generally considered hazardous for small craft.

The Beaufort Wind Scale

A standardised empirical measure that relates wind speed to observed conditions at sea and on land.

Force Description Speed (Knots) Speed (mph) Land Conditions
0 Calm < 1 < 1 Smoke rises vertically
1 Light Air 1 – 3 1 – 3 Direction shown by smoke drift
2 Light Breeze 4 – 6 4 – 7 Wind felt on face, leaves rustle
3 Gentle Breeze 7 – 10 8 – 12 Leaves and small twigs in constant motion
4 Moderate Breeze 11 – 16 13 – 18 Raises dust and loose paper, small branches move
5 Fresh Breeze 17 – 21 19 – 24 Small trees in leaf begin to sway
6 Strong Breeze 22 – 27 25 – 31 Large branches in motion, whistling in wires
7 Near Gale 28 – 33 32 – 38 Whole trees in motion, inconvenience in walking
8 Gale 34 – 40 39 – 46 Twigs break off trees, generally impedes progress
9 Strong Gale 41 – 47 47 – 54 Slight structural damage (chimney pots, slates)
10 Storm 48 – 55 55 – 63 Seldom experienced inland; trees uprooted
11 Violent Storm 56 – 63 64 – 72 Very rarely experienced; accompanied by widespread damage
12 Hurricane ≥ 64 ≥ 73 Devastating damage, air filled with debris

Wind Speed FAQ

Answers to the most frequently asked questions about wind measurement, conversions, and safety.

To convert knots to mph, multiply the wind speed in knots by 1.15078. For example, 10 knots is approximately 11.5 mph. This calculator handles the conversion automatically.

The Beaufort scale is an empirical measure that relates wind speed to observed conditions at sea or on land. It ranges from Force 0 (Calm, <1 knot) to Force 12 (Hurricane, ≥64 knots), providing a standardised way to describe wind intensity without instruments.

Most consumer drones are rated for maximum wind resistance of around 10–12 m/s (22–27 mph, or Force 4–5 on the Beaufort scale). For safe, stable, and cinematic flight, it is highly recommended to fly in winds below 8 m/s (18 mph).

Wind speed is traditionally measured using an anemometer, which uses rotating cups or propellers to calculate velocity. Modern meteorological stations may also use ultrasonic sensors or Doppler radar for highly accurate, maintenance-free readings.

A knot is one nautical mile per hour. A nautical mile is based on the Earth's circumference and is exactly 1.852 kilometres (or about 1.15078 statute miles). Therefore, a knot is slightly faster than a standard mile per hour.

Similar Posts

  • Mortgage Overpayment Calculator UK 2026

    Mortgage Overpayment Calculator UK 2026 | Save Interest & Pay Off Early calculatorsonline.co.uk Mortgage Overpayment Calculator UK 2026 Instantly calculate how much interest you can save and how early you can pay off your UK mortgage with monthly or lump sum overpayments. Perfect for homeowners looking to become debt-free faster. 🏠 UK Mortgages 💷 Save…

  • ASCII Converter

    ASCII Converter | Free Text to ASCII, Binary, Hex & Decimal Tool calculatorsonline.co.uk ASCII Converter Instantly convert text to ASCII decimal, binary, hexadecimal, or octal codes — and decode ASCII codes straight back into readable text. 🔤 Text ⇄ ASCII 💻 Dev Tool ⚡ Instant Conversion 📱 Mobile Friendly ASCII Conversion Tool Convert Between Text…

  • Loft Insulation Calculator

    Loft Insulation Calculator 2026 | Material & Rolls Estimator calculatorsonline.co.uk Loft Insulation Calculator 2026 Instantly estimate the number of insulation rolls, material volume, and coverage needed for your loft insulation project. Calculate area, thickness, and quantities with precision. 🏠 Loft Area 📏 Thickness 📦 Rolls Needed 📊 Material Estimator Loft Dimensions & Insulation Specs Define…

  • Livestock Water Intake Calculator

    Livestock Water Intake Calculator | Free Daily Hydration Estimator calculatorsonline.co.uk Livestock Water Intake Calculator Instantly estimate the daily water requirements for cattle, sheep, pigs, and horses based on body weight, ambient temperature, and production stage. 🐄 Livestock Management 💧 Daily Hydration 🌡️ Temperature Adjusted 📱 Mobile Friendly Farm Management Tool Estimate Daily Water Needs Enter…

  • Nanometers to Millimeters Converter

    Nm to Mm Converter | Nanometers to Millimeters Calculator 2026 calculatorsonline.co.uk Nanometers to Millimeters Converter Instantly convert nanometers to millimeters, micrometers, and meters. Essential for nanotechnology, physics, engineering, and precise scientific measurements. 🔬 Nanotechnology ⚛️ Physics ⚙️ Engineering 📏 Metric Scale Nano-scale Measurements Enter your length in nanometers to convert to macro-scale units 📏 Length…