Plan your factory like a pro. Calculate exactly how many machines you need, work out your power budget, and trace every raw resource requirement for your entire production chain — all updated for Update 1.0.
Production or Power?
Whether you’re scaling up a production line or balancing your power grid, pick the calculator below to get instant results for your Satisfactory factory.
Production Calculator
Enter your target output to see the machines needed
Standard recipe. Adjust input rates manually for alternate recipes.
How many items per minute you need
100% = normal, up to 250% with 3 Power Shards
Production Result
Machines, raw inputs, and belt requirements
Select an item and target output, then click Calculate Machines Needed.
Power Calculator
Plan your power grid and fuel supply
Sum of all buildings’ power draw (check power graph in-game)
Based on Update 1.0 power values
Overclocked generators produce more but burn fuel faster
Safety buffer for spikes (recommended: 10–25%)
For total fuel stockpile calculation
Power Result
Generators needed, fuel rates, and stockpile
Enter your factory’s power demand, then click Calculate Power Grid.
How to Use the Satisfactory Calculator Complete Overview
What this calculator does
Think of the Satisfactory Calculator as a fast second opinion. You can run your own sums, enter the same details here, and see straight away whether satisfactory lines up with what you expected.
Who it helps
This tool is useful for curious learners, engineers and parents helping with homework. Each group approaches satisfactory with different priorities, yet the same careful inputs lead to a result everyone can rely on. Many people open this page while checking a worked solution, verifying a long calculation and testing different values quickly. Having the answer ready keeps the rest of the task on track.
Getting accurate results
Use the Satisfactory Calculator as part of a short checklist. Begin by choosing to test simple values to build confidence. Next, compare the answer with an estimate. Finally, compare the answer with your own expectation, and look again at any input if the two are far apart.
Mistakes to avoid
People often go wrong by mixing up signs or using degrees instead of radians. Neither is hard to avoid once you know to look for it, and a quick review before you rely on the answer usually catches both.
Reading your result
After you calculate, look at the number in context. Maths and satisfactory are the kind of details that can shift the picture, so keep a note of the inputs you used and revisit them if anything changes. Share the page with colleagues, friends or family if they are working through satisfactory as well. We update our tools regularly, so check back for improvements to satisfactory and related maths calculators. If you are unsure about a value, try a low and a high estimate and see how far apart the answers are. Bookmark this page so the Satisfactory Calculator is always one tap away when you need it again.
A note on accuracy
Please treat the outcome from the Satisfactory Calculator as a helpful estimate. Your own circumstances may differ, so verify key figures with a trusted source before relying on them for a major decision.
Conveyor Belts & Buildings
Quick reference for Satisfactory’s building tiers, belt throughput, and power generation. Always match your belt tier to your production output to avoid bottlenecks.
| Building / Item | Value | Notes |
|---|---|---|
| Mk.1 Conveyor Belt | 60 items/min | Starting tier, good for 1 Constructor |
| Mk.2 Conveyor Belt | 120 items/min | Early game backbone |
| Mk.3 Conveyor Belt | 270 items/min | Mid-game tier |
| Mk.4 Conveyor Belt | 480 items/min | Late mid-game |
| Mk.5 Conveyor Belt | 780 items/min | Late game |
| Mk.6 Conveyor Belt | 1,200 items/min | Fastest — for heavy outputs |
| Coal Generator | 75 MW @ 15 coal/min | +45 m³ water/min |
| Fuel Generator | 150 MW @ 12 fuel/min | Uses packaged or piped fuel |
| Nuclear Power Plant | 2500 MW @ 0.5 rods/min | +240 m³ water/min, produces waste |
| Geothermal Generator | ~150 MW average | Variable output, zero fuel |
| Power Shard OC Scaling | P = P₀ × (clock/100)^1.322 | Non-linear power cost for overclock |
Satisfactory Calculator – Production Ratios
In Satisfactory, machines needed = target output per minute ÷ the recipe’s output per minute per machine. If a recipe makes 30 items a minute per machine and you need 120, you need 4 machines. Work backwards through each input to plan the full chain, and use overclocking and power shards to change the numbers. Check the recipe rates in the game or the wiki.
Satisfactory Calculator FAQ
Everything you need to know about planning your factory in Satisfactory Update 1.0.
Divide your target output (items per minute) by the production rate of a single machine. Always round up to the next whole number since you cannot build a fraction of a building. For example, if you need 45 Iron Plates per minute and a Constructor makes 20/min, you need ceil(45/20) = 3 Constructors. This calculator does the rounding and overclocking adjustments for you automatically.
A single Coal Generator produces 75 MW of power and consumes 15 coal per minute plus 45 m³ of water per minute. Clock speed overclocking scales both power output and fuel consumption linearly — a 200% overclocked Coal Generator produces 150 MW but burns 30 coal/min. Fuel Generators produce 150 MW on 12 fuel/min, and Nuclear Power Plants produce 2500 MW on 0.5 Uranium Fuel Rods/min plus 240 m³ water/min.
The Mk.6 Conveyor Belt is the fastest, with a maximum throughput of 1,200 items per minute. Mk.5 belts handle 780/min, Mk.4 handle 480/min, Mk.3 handle 270/min, Mk.2 handle 120/min, and Mk.1 belts handle 60/min. Always ensure your belt tier can handle the combined output of all machines feeding into it, or your production will bottleneck.
Overclocking a building between 1% and 250% scales its production speed and power consumption linearly for output, but power draw uses the formula: Actual Power = Base Power × (Clock Speed / 100)^1.321928. This means doubling clock speed doubles output but increases power draw by roughly 2.5×. You need Power Shards to overclock — 1 shard for up to 150%, 2 shards for up to 200%, and 3 shards for up to 250%.
Work backwards from your final product. For each item in the chain, multiply the target rate by the ingredient ratio, then divide by the per-machine production rate to get the number of machines. Sum up all raw ore and resource inputs. This calculator traces the full chain — enter a target end product and it will break down every raw material needed per minute.
Alternate recipes often dramatically improve efficiency. For example, ‘Steeled Frame’ replaces Reinforced Iron Plates with Steel Beams, massively reducing iron ore usage. ‘Solid Steel Ingot’ lets you skip Iron Ingots entirely for Steel production. Always check alternate recipes in your Hard Drive unlocks before scaling up production — this calculator shows standard recipes, but you can manually adjust input rates for alternate recipe ratios.
Standard power draw at 100% clock: Constructors use 4 MW, Smelters use 4 MW, Foundries use 16 MW, Assemblers use 15 MW, Manufacturers use 55 MW, Packagers use 10 MW, Refineries use 30 MW, Blenders use 75 MW, and Particle Accelerators use 500–1,500 MW depending on recipe. Always build a 10–25% power buffer to prevent brownouts when machines spin up.
Yes. Underclocking (below 100%) is a powerful optimisation tool. Because power consumption scales with a 1.322 exponent, running two Constructors at 50% clock speed uses significantly less power than one at 100% while producing the same output. This trick is especially useful for machines that only need to match the throughput of a slower belt or downstream consumer.
Target rate ÷ rate per machine.
Yes, work backwards through each ingredient.
