RM43 Mix Ratio Calculator
Work out exactly how much RM43 to add to your sprayer for total vegetation control or spot treatment, based on the manufacturer’s labeled mix ratios.
Treatment & Sprayer Details
Choose your treatment type and enter your sprayer or area details
Bare ground rate is based on square footage. Spot treatment rate is based on your sprayer’s water volume.
Total square footage of the driveway, fence line, or bare ground you want to clear.
Label allows 1–10 gallons of water per 1,000 sq ft depending on your sprayer type and speed.
Total capacity of your backpack or pump-up sprayer, filled with water.
RM43 typically needs only one application per year. Multiple applications may exceed the label’s maximum rate.
Your RM43 Mix Ratio
Exact product and water amounts for your sprayer
Enter your treatment type and sprayer or area details above, then click Calculate Mix Ratio to see exactly how much RM43 to use.
How to Use the RM43 Mix Ratio Calculator Full Walkthrough
What this calculator does
Whether you are checking a quick estimate or planning something properly, the RM43 Mix Ratio Calculator gives you a dependable starting point for rm43 mix ratio. It is free to use, needs no sign-up, and works on phones, tablets and desktop screens alike.
Who it helps
We built this page for DIY enthusiasts, landlords and gardeners and allotment holders. Whatever your background, the same clear steps apply to rm43 mix ratio. It often comes into play when preparing for a home project, working out how much material to buy and budgeting for garden work, because a reliable figure for rm43 mix ratio prevents costly second-guessing.
Getting accurate results
Start with the basics: write down what you already know, and try to allow a small buffer. It also pays to sketch the space before entering numbers. With clean inputs in place, the RM43 Mix Ratio Calculator does the heavy lifting and you can concentrate on interpreting the answer.
Mistakes to avoid
When results seem off, the cause is frequently buying exactly the calculated amount with no spare or measuring only once. Re-reading your inputs line by line is the quickest way to find and fix either one.
Reading your result
Results are most useful when you understand what drives them. Experiment with rm43 and mix in turn, and you will quickly see which one matters most for rm43 mix ratio. Keeping a short note of each result makes it easy to compare options and explain your reasoning to others. Bookmark this page so the RM43 Mix Ratio Calculator is always one tap away when you need it again. Share the page with colleagues, friends or family if they are working through rm43 mix ratio as well. The layout is designed for readability, so you can use the RM43 Mix Ratio Calculator comfortably on a small screen while on the move.
A note on accuracy
Please treat the outcome from the RM43 Mix Ratio Calculator as a helpful estimate. Your own circumstances may differ, so verify key figures with a trusted source before relying on them for a major decision.
RM43 Mixing Ratios at a Glance
These figures reflect the standard RM43 product label. Always confirm against the label on your own container before mixing.
| Use Case | Mix Ratio | Context / Details |
|---|---|---|
| Total Vegetation Control (Bare Ground) | 7.4 oz / 1,000 sq ft | Diluted in 1–10 gallons of water |
| Spot Treatment (Brush, Vines, Weeds) | 6 oz / gallon | Spray foliage to wet thoroughly |
| Maximum Annual Rate | 2.5 gal / acre / year | Equal to 7.4 oz per 1,000 sq ft per year |
| Rainfast Time | 2 hours | Avoid rain or irrigation before this passes |
| Standard Container Sizes | 1 gal / 2.5 gal | Equal to 128 oz / 320 oz of concentrate |
The Two Label Rates: 7.4 fl oz per 1,000 sq ft and 6 fl oz per Gallon
RM43 Total Vegetation Control is a concentrate containing 43% glyphosate plus imazapyr, and the label gives two different mixing rates for two different jobs. For total vegetation control on bare ground, mix 7.4 fluid ounces of RM43 with enough water to make 1 to 10 gallons of spray solution, and apply that evenly over 1,000 square feet. For spot control of brush, vines and weeds, mix 6 fluid ounces of RM43 per 1 gallon of spray solution and spray the foliage until wet. The two rates are not interchangeable: the bare-ground rate is a measured dose per area, while the spot rate is a concentration per gallon. The label also sets a hard ceiling — a maximum of 2.5 gallons of product per acre per year, which is the same as 7.4 fluid ounces per 1,000 square feet per year, so you cannot re-treat the same ground twice in a year at the full bare-ground rate.
Bare-Ground Rate per 1,000 sq ft: How Much Product and How Many Bottles
At 7.4 fluid ounces per 1,000 square feet, the amount of product you need is a straight multiplication: divide your area in square feet by 1,000 and multiply by 7.4. A 32-fluid-ounce bottle covers 4,324 square feet at the bare-ground rate (32 ÷ 7.4 × 1,000). A 1-gallon bottle (128 fluid ounces) covers 17,297 square feet, and a 2.5-gallon jug (320 fluid ounces) covers 43,243 square feet — the figure Tractor Supply quotes for the 2.5-gallon size. The table below works it out for common areas, and for the bottles RM43 is sold in.
| Area to treat | RM43 needed at 7.4 fl oz per 1,000 sq ft | Water to mix it in |
|---|---|---|
| 500 sq ft (small patio edge) | 3.7 fl oz | 0.5–5 gallons |
| 1,000 sq ft (four-car garage) | 7.4 fl oz | 1–10 gallons |
| 2,500 sq ft (long driveway) | 18.5 fl oz | 2.5–25 gallons |
| 5,000 sq ft (fence rows and paths) | 37 fl oz | 5–50 gallons |
| 10,000 sq ft (quarter acre) | 74 fl oz (0.58 gallons) | 10–100 gallons |
| 43,560 sq ft (one acre) | 322 fl oz (2.5 gallons) | 44–435 gallons |
The water is only a carrier: the label allows anywhere from 1 to 10 gallons of water per 1,000 square feet, so use less water when the weeds are short and the ground is flat, and more water when the weeds are tall and dense, so the spray reaches all the foliage. The product dose per area is what matters, not the water volume.
Spot Treatment: 6 oz per Gallon
For spot work — a clump of brush, a vine on a fence, weeds along a wall — the label rate is 6 fluid ounces of RM43 per 1 gallon of spray solution. That is a stronger concentration than the bare-ground mix, because you are wetting individual plants rather than dosing a measured area. A 32-ounce bottle makes 5.33 gallons of spot spray (32 ÷ 6), and a 1-gallon bottle makes 21.33 gallons. A standard 1-gallon pump sprayer takes 6 fluid ounces; a 2-gallon sprayer takes 12 fluid ounces; a 4-gallon backpack sprayer takes 24 fluid ounces, which is 1.5 pints. Spray the foliage until it is thoroughly wet but not running off, and treat when the weeds are actively growing — the label says best results come from applications to actively growing weeds in early summer.
Ratio Basics: Fluid Ounces, Pints, Gallons and Percent
Herbicide labels mix three ways of stating a ratio, and they are easy to confuse. A fluid ounce is a volume: 16 fluid ounces make 1 pint, 128 fluid ounces make 1 gallon, and 8 pints make 1 gallon. A percent solution is parts of product per 100 parts of finished spray: a 1% solution is 1.28 fluid ounces per gallon (128 × 0.01), and a 1.5% solution is 1.92 fluid ounces per gallon. The RM43 bare-ground rate of 7.4 fluid ounces per 1,000 square feet is not a percent at all — it is a dose per area, and the percent changes with how much water you mix it into: 7.4 fluid ounces in 1 gallon of water is a 5.8% solution, while the same 7.4 fluid ounces in 10 gallons is a 0.58% solution. That is why the label gives the water as a range rather than a fixed amount, and why you should always work from the dose per area for bare ground and the ounces per gallon for spot work.
| Amount of RM43 | In fluid ounces | In pints | In millilitres (approx.) |
|---|---|---|---|
| Spot rate per gallon | 6 fl oz | 0.375 pints | 177 ml |
| Bare-ground rate per 1,000 sq ft | 7.4 fl oz | 0.46 pints | 219 ml |
| 1 pint | 16 fl oz | 1 pint | 473 ml |
| 1 quart | 32 fl oz | 2 pints | 946 ml |
| 1 gallon | 128 fl oz | 8 pints | 3,785 ml |
Soil Residual: Why Nothing Grows There for Up to a Year
RM43 keeps ground bare for up to a year because of its second active ingredient, imazapyr. Glyphosate kills what it touches and then breaks down in the soil within days to weeks, but imazapyr is absorbed by roots and stays active in the soil, stopping seeds from germinating and new shoots from establishing. That is the whole point of a total vegetation control product — and also its main risk. Do not apply RM43 anywhere you want to plant within the next year, and keep it well away from the root zones of trees, shrubs and lawns you want to keep, because imazapyr can move through soil water and be taken up by roots beyond the sprayed area. Apply only where no vegetation is wanted for up to a year: fence rows, gravel paths, driveways, parking areas and around farm buildings. If weeds are taller than 6 inches, mow or cut them down first so the spray reaches the leaves and the soil evenly.
Safety Tips: Read the Label Before Every Use
It is a violation of federal law in the United States to use RM43 in a manner inconsistent with its labelling, and the same principle applies anywhere: the label on the bottle you buy is the authority, not a website. Wear long sleeves, long trousers, shoes and socks, and chemical-resistant gloves when mixing and spraying; keep children and pets off treated areas until the spray has dried; do not spray on windy days, because drift can kill plants you want to keep; and never spray near water, ditches or drains, because imazapyr can move in water. Store the concentrate in its original container, out of reach of children, and triple-rinse empty containers before disposal. If the product gets on skin, wash with plenty of soap and water; if it gets in eyes, rinse for 15 to 20 minutes and seek medical advice. RM43 is a US product — in the UK, glyphosate and imazapyr products are regulated separately, so check that the product you are buying is authorised for your use and follow its UK label.
Related Herbicide Mixing: Remedy Ultra (Triclopyr) — Foliar, Basal Bark and Pasture
Remedy Ultra is a different tool for a different job: it contains 60.45% triclopyr as the butoxyethyl ester, and it controls woody plants and broadleaf weeds on rangeland and pasture without killing grass. It is mixed three ways, and the method depends on the target. For foliar spot treatment, use a 1 to 1.5% solution in water — that is 1 to 1.5 gallons of product per 100 gallons of spray, or 1.28 to 1.92 fluid ounces per gallon — and spray the whole plant until the foliage is wet. For low-volume basal bark treatment of woody plants with stems under 6 inches across, mix 20 to 30 gallons of Remedy Ultra in enough oil to make 100 gallons of spray (a 20–30% mix, which is 25.6 to 38.4 fluid ounces per gallon of finished spray) and spray the lower 12 to 15 inches of trunk, including the root collar, until wet but not running off. The same 20–30% oil mix is used for cut-stump treatment, applied to the root collar, the sides of the stump and the outer part of the cut surface. For pasture broadcast, apply 1 to 2 pints of product per 10 gallons of water per acre for small weeds, and up to 1.5 quarts per 10 gallons per acre for deep-rooted perennials and woody species. The annual limits matter: no more than half a gallon per acre per growing season on grazed land, and up to 8 quarts per acre per year on non-grazed land. As with RM43, the product label governs — these figures are from the Remedy Ultra label as summarised by its retailers, and rates vary with the target species.
How much Remedy Ultra do I need for a 25-gallon tank?
For a foliar spot mix at 1.5%, a 25-gallon tank needs 25 × 1.92 = 48 fluid ounces, which is 3 pints. For a basal bark mix at 25%, a 25-gallon tank needs 25 × 32 = 800 fluid ounces, which is 6.25 gallons of product in oil. The two methods use very different amounts, which is why the method has to be decided before the tank is mixed.
Can I use RM43 on my lawn?
No. RM43 is a total vegetation control product — it kills grass as well as weeds, and the imazapyr keeps the soil bare for up to a year. It is only for places where no vegetation is wanted. For weeds in a lawn, use a selective lawn weedkiller, not RM43.
How long before I can replant after RM43?
The label says the ground stays bare for up to a year. Do not plant anything in treated soil for at least a year, and longer if the soil is heavy or the application was at the full rate. If you need to replant sooner, use a spot treatment with glyphosate alone instead of RM43.
Why does the bare-ground rate give a range of water volumes?
Because the dose that matters is 7.4 fluid ounces of product per 1,000 square feet, and the water is only the carrier that spreads it. Use 1 gallon of water per 1,000 square feet on short, sparse weeds and up to 10 gallons on tall, dense growth so the spray covers all the foliage and the soil evenly.
RM43 Mix Ratio FAQ
Everything you need to know about diluting, mixing, and applying RM43 correctly.
For total vegetation control on bare ground, mix 7.4 fluid ounces of RM43 per 1,000 square feet, diluted into 1 to 10 gallons of water depending on your sprayer. For spot treatment of brush, vines, and tough weeds, use 6 fluid ounces of RM43 per 1 gallon of water instead.
For spot treatment, a 4-gallon sprayer needs 24 fluid ounces of RM43 (6 oz per gallon multiplied by 4 gallons). For bare ground control, the amount depends on how much area that 4 gallons is meant to cover, since the product rate is tied to square footage rather than tank size.
No. The maximum labeled rate is 2.5 gallons of product per acre per year, equal to 7.4 fluid ounces per 1,000 square feet per year. Exceeding this rate is against federal label law and can damage soil, nearby plants, and waterways without improving results.
One gallon of RM43 (128 fluid ounces) covers roughly 17,000 square feet at the standard bare ground rate of 7.4 fluid ounces per 1,000 square feet, which works out to about 2.5 gallons of product per acre.
No. RM43 combines glyphosate with imazapyr and a soil-active preventer, giving it season-long, non-selective control that can last up to a year. Standard Roundup formulas are glyphosate-only and break down faster, so they don’t stop regrowth the way RM43 does.
