Calculate absolute humidity, water vapour density, and dew point instantly from temperature and relative humidity using the Magnus-Tetens formula.
Air Conditions
Enter temperature and relative humidity to calculate absolute humidity
Typical UK room temperature is 18-22°C. Outdoor temperatures vary widely by season.
The relative humidity reading from your hygrometer or weather station (0-100%).
Adjusts atmospheric pressure for high-altitude locations. Leave as 0 for sea level.
Humidity Results
Absolute humidity, vapour pressure, and dew point
Enter temperature and relative humidity above and click Calculate Absolute Humidity to see your full psychrometric profile.
Getting the Most From the Absolute Humidity Calculator Full Walkthrough
What this calculator does
Time is precious, and absolute humidity should not eat into it. With the Absolute Humidity Calculator, you can try several scenarios in a minute or two and compare the results side by side before you commit to anything.
Who it helps
From engineers, teachers and students, the people who use the Absolute Humidity Calculator share one goal: a trustworthy figure without wasted effort. Many people open this page while checking lab results, revising for an exam and converting between scientific units. Having the answer ready keeps the rest of the task on track.
Getting accurate results
Preparation pays off here. Try to repeat the calculation with a second method, then note the constants you assume. After that, enter the numbers in the Absolute Humidity Calculator, read the answer, and repeat with a variation to test how stable the outcome really is.
Mistakes to avoid
When results seem off, the cause is frequently mixing SI and non-SI units or using a formula outside its conditions. Re-reading your inputs line by line is the quickest way to find and fix either one.
Reading your result
Once you have a result, take time to interpret it. Figures linked to absolute and humidity rarely tell the whole story alone, so compare the answer with what you would expect in real life and note any assumptions you made. We update our tools regularly, so check back for improvements to absolute humidity and related science calculators. Share the page with colleagues, friends or family if they are working through absolute humidity as well. Because the calculation runs instantly in your browser, you can test as many scenarios as you like without any limit. Clear inputs lead to clear answers, so take a few extra seconds to read each label on the calculator before typing.
A note on accuracy
Remember that the Absolute Humidity Calculator works with the information you supply. For anything critical, double-check the details independently or ask someone qualified to review your figures.
Absolute Humidity at Common Conditions
Typical absolute humidity values (g/m³) at different temperatures and relative humidity levels, based on the Magnus-Tetens saturation vapour pressure formula.
| Temperature | RH 30% | RH 50% | RH 70% | RH 90% |
|---|---|---|---|---|
| 0°C | 1.45 g/m³ | 2.42 g/m³ | 3.39 g/m³ | 4.36 g/m³ |
| 10°C | 2.81 g/m³ | 4.69 g/m³ | 6.57 g/m³ | 8.45 g/m³ |
| 20°C | 5.20 g/m³ | 8.66 g/m³ | 12.13 g/m³ | 15.59 g/m³ |
| 25°C | 6.92 g/m³ | 11.53 g/m³ | 16.15 g/m³ | 20.76 g/m³ |
| 30°C | 9.08 g/m³ | 15.13 g/m³ | 21.18 g/m³ | 27.23 g/m³ |
| 35°C | 11.78 g/m³ | 19.63 g/m³ | 27.49 g/m³ | 35.34 g/m³ |
Absolute Humidity Calculator
Absolute humidity is the mass of water vapour per cubic metre of air. It can be worked out from temperature and relative humidity: saturation vapour pressure es (hPa) = 6.112 × e^(17.62T ÷ (243.12 + T)), then AH (g/m³) = 216.7 × (RH ÷ 100 × es) ÷ (T + 273.15). At 20°C and 50% RH, es is about 23.4 hPa and absolute humidity is about 8.6 g/m³.
Absolute Humidity FAQ
Everything you need to know about absolute humidity, dew point, and how they differ from relative humidity.
Absolute humidity is the total mass of water vapour present in a given volume of air, usually expressed in grams per cubic metre (g/m³). Unlike relative humidity, which is a percentage relative to the maximum amount of moisture air can hold at a given temperature, absolute humidity is a direct measurement of water content that does not change with temperature unless moisture is added or removed.
Absolute humidity is calculated using the formula AH = (RH/100) × Es × 2.1674 / (273.15 + T), where Es is the saturation vapour pressure (calculated via the Magnus-Tetens formula), RH is relative humidity as a percentage, and T is temperature in degrees Celsius. The saturation vapour pressure formula is Es = 6.112 × exp((17.62 × T) / (243.12 + T)), measured in hectopascals (hPa).
Relative humidity is a percentage that compares the current amount of water vapour in the air to the maximum amount the air could hold at that specific temperature. Absolute humidity is a fixed measurement (grams of water per cubic metre of air) that represents the actual mass of water vapour present, regardless of temperature. As temperature rises, air can hold more moisture, so relative humidity can drop even if absolute humidity stays the same.
Dew point is the temperature at which air becomes fully saturated with water vapour (100% relative humidity) and condensation begins to form. It is directly related to absolute humidity — the higher the absolute humidity, the higher the dew point. Dew point is considered a more reliable indicator of how humid the air actually feels, since it does not change with temperature the way relative humidity does.
A comfortable indoor absolute humidity level typically falls between 7 and 12 grams per cubic metre (g/m³), corresponding to a relative humidity of 40-60% at typical room temperatures of 20-22°C. Levels below 7 g/m³ can feel dry and cause skin irritation, while levels above 12 g/m³ can feel sticky, promote mould growth, and create an uncomfortable environment.
Absolute humidity is critical for HVAC system design, dehumidifier sizing, industrial drying processes, and greenhouse climate control because it represents the actual mass of water vapour that needs to be added or removed from the air. Unlike relative humidity, it allows engineers to perform precise mass-balance calculations for moisture removal rates, condensation risk assessment, and psychrometric chart analysis.
Grams of water vapour per cubic metre of air.
Relative humidity is a percentage of the maximum the air can hold at that temperature.
